== DIYTIG ==
====== Menu System ======
==== Process Type ====
  * **TIG**
     * //2T// - 2T stands for “2 touch”. This is a two-touch setting that requires the welder to either press the torch trigger or the foot pedal switch to start and release to stop. This ideal for short welds or if using a foot pedal.
     * //4T// - 4T stands for “4 touch”. This is a four-touch setting. This requires you to press and release the trigger to activate the welder and start welding without having to hold the trigger. To deactivate 4T, you press and release the trigger to stop the welding process. This is ideal for longer weld runs.♣ \\

\\
♣ - At this stage, these options are not available. I'm concentrating on only implementing the pedal as the input method to make things easier for now. In a later revision, these options may become available for those wanting it as an alternative to the foot pedal.

----
  * **Stick**
This options implementation is not yet decided upon.

----
  * **Pulse**
     * //On//
     * //Off//
This option enables [[projects:diytig:menu:pulseweld|Pulse Weld]].

----
[[projects:diytig:menu|BACK]]