projects:diytig:menu [FulcrumLabs]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

==== DIY TIG Welder ====
=== Menu System ====

- **[[projects:diytig:menu:amps|Amperage Control]]**
  * //Max Amps//
    * 10 - 200 amps
  * //Start Amps//
    * 10 - 200 amps
  * //Up Slope//
    * Amps/Second 
  * //Down Slope//
    * Amps/Second
  * //End Amps//
    * 10 - 200 amps

- **[[projects:diytig:menu:solenoid|Gas Solenoid]]**
  * //Pre Flow//
    * 0/1 seconds
  * //Post Flow//
    * 1 - 10 seconds

- **[[projects:diytig:menu:pulseweld|Pulse Weld]]**
  * //Pulse Rate//
    * 1 - 50 per second
  * //Background Amps//
    * 10 - 200 amps (limited by Max Amps value)
  * //Pulse Width//
    * 1 - 99%
  * //Peak Pulse Amps//
    * Background Amps value  to  Max Amps value

- **[[projects:diytig:menu:frequency|Frequency (AC)]]**
  * 50 - 200Hz

- **[[projects:diytig:menu:acbalance|A/C Balance]]**
  * 100%EN - 0 - 100%EP

- **[[projects:diytig:menu:acdc|AC/DC]]**
  * //AC//
  * //DC//
    * DCEN
    * DCEP

- **[[projects:diytig:menu:hvhf|High Voltage / High Frequency]]**
  * //On//
  * //Off//

- **[[projects:diytig:menu:process|Process Type]]**
  * //TIG//
    * 4T
    * 2T
  * //Stick//
  * //Pulse//
    * On
    * Off

- **[[projects:diytig:menu:house|House Keeping]]**
  * Factory Reset
  * Time(?)