projects:diytig:designfiles [FulcrumLabs]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

==== DIY TIG Welder ====
=== Design Files ===

This area stores all the current Fritzing design files for the DIY TIG Welder, including schematics and PCB designs. You are welcome to download and modify, or simply create Gerber files from them for production. I may at some point in the future provide Gerber files on their own to make it easier for people, however, at this point I see no reason to.\\
\\
**[[https://fritzing.org/download/|Firzing download page]]**


----


   * **Gate Driver - High**
      * {{ :projects:diytig:high_gate_driver_001.fzz | Gate Driver - High (Fritzing File)}}
      * {{:projects:diytig:high_gate_driver_001_schem.png?200|}}

----

   * **Gate Driver - Low**
      * {{ :projects:diytig:low_gate_driver_001.fzz | Gate Driver - Low (Fritzing File)}}
      * {{:projects:diytig:low_gate_driver_001_schem.png?200|}}

----

   * **Logic Inverter Board**
      * {{ :projects:diytig:logic_inverter_001.fzz | Logic Inverter Board (Fritzing File)}}
      * {{:projects:diytig:logic_inverter_001_schem.png?200|}}

----

   * **Arduino Nano Shield**
      * {{ :projects:diytig:arduino_shield.fzz | Nano Shield (Fritzing File)}}
      * {{:projects:diytig:arduino_shield_schem.png?200|}}

----