Differences

This shows you the differences between two versions of the page.

--- projects:diytig:menu:pulseweld [2022/08/14 21:37] – spsmith
+++ projects:diytig:menu:pulseweld [2022/09/30 22:59] (current) – spsmith
@@ Line 5: / Line 5: @@
 - **Pulse Rate**
   * 1 - 50 per second
-How many peak amp pulses will be generated per second.
+How many peak amp pulses will be generated per second.\\
+Step size: 1 Second
 ----
@@ Line 11: / Line 12: @@
 - **Background Amps**
   * 10 - 200 Amps (limited by 'Max Amps' value)
-This is the current level that will be maintained in between the peak amp pulses.
+This is the current level that will be maintained in between the peak amp pulses.\\
+Step size: 1 Amp
@@ Line 20: / Line 22: @@
 This value determines how much time will the peak amp pulse will be 'on' versus 'off'. \\
 T(total) = T(on) + T(off) \\
-T(total) would be repeated within each second as determined by //Pulse Rate//
+T(total) would be repeated within each second as determined by //Pulse Rate//\\
+Step size: 1%
@@ Line 26: / Line 29: @@
 - **Peak Pulse Amps**
-  * A value between //Background Amps// and //Max Amps// variables.
+  * A value between //Background Amps// and //Max Amps// variables.\\
+Step size: 1 Amp
 ----
 [[projects:diytig:menu|BACK]]